Delta AC FILTER KIT – Less Transformer

AC FILTER: Pre-Installation Info

Notice:

In the following instructions the surface mount box #0 is shown, but all recessed mounting boxes (box options #1 & #8) are connected in the same manner.
An AC filter may be daisy-chained in parallel, to a maximum of 5 faucets.
Polarity IS NOT a concern when making these connections. 

Warning:

An AC filter is required for all Delta® Proximity® products only.
Soap dispensers and non-Delta products cannot be wired through the AC filter. DEMD, H2Optics®
Delta flushometers can be wired through the AC Filter but is not required.
DO NOT ground the secondary side of the transformer.
The green ground wire MUST be connected to a clean building ground source (neutral bus bar).
Recommended total maximum length of 30.5m (100ft) of 18AWG stranded wire when connecting faucets.
CAUTION: Prior to powering up the 24V transformer ensure that the hardwire converter is disconnected from the driver board.
Additional Delta Links
View the Manufacturer Warranty
Browse all Delta Products

Specifications