Speakman Eyesaver Single Post Laboratory Faucet

In the event of a chemical eye burn, panic ensues. Our senses are rendered and instinct naturally takes over. Our reflexes instantly rush us to the nearest location of relief-the sink, safety showers, eyewash stations, etc.…However, with the introduction of “faucet-mounted” eyewash stations, victims can inadvertently flush scalding-hot water into their eyes in a moment of confusion, causing more harm than good. Our newest eyewash faucet model, the Speakman Eyesaver SEF-1850-NA Single Post Laboratory Non-aerated Eyewash Faucet, is a revolutionary product that combines a lab faucet with an independently operated eyewash. With a simple pull of the lever, water will instantly flush into the eyes of a burn victim. Two separate water supplies ensure that cold to tepid water will bring relief to the victim, regardless if hot water is being run from the sink simultaneously. The single-post mount design will save valuable laboratory counter space and require no additional space to be installed. The emergency eye wash features a 2 GPM flow rate at 30 PSI while the faucet features a 1.5 GPM flow rate. The SEF-1850-NA features a non aerated spray functionality. Certified to ANSI/ISEA Z358.1, ASME A112.18.1/CSA B125.1, NSF 61 & NSF 372.

Speakman SEF-1850-NA Features:

Single post faucet with integrated eyewash
Non-aerated sprays
Dual aerated spray heads with flip top caps
Eyewash is lift handle activated
Tepid water ready

Speakman SEF-1850-NA Specifications:

Length: 9″ (left to right)
Width: 7-5/8″ (front to back)
Height: 8-7/8″ (top to bottom)
Flow Rate (GPM): 2 gallons-per-minute
Additional Speakman Links
View the Manufacturer Warranty
Browse all Speakman Products
Speakman Eyesaver Collection

Specifications