Baldwin Right Handed Reverse Bevel Lever Strength Fail Secure Electrical Mortise Lock with 2-3/4″ Backset

Right Handed Reverse Bevel Lever Strength Fail Secure Electrical Mortise Lock
Fail Secure electrical mortise lock with 2-3/4″ backset
Lever x Lever
Baldwin mortise locks are reversible in the field if needed
Latch bolt by knob either side ONLY when solenoid is energized.
Latch bolt retracted by key outside and knob inside when solenoid is NOT energized.
Inside knob is always free
Auxiliary Latch deadlocks latch bolt.
Power off locks outside knob
Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Electrical Specifications:

Rated Voltage:

24V AC / 24V DC – AC/DC Converter is built inside

Operating Voltage Range:

22-26V AC/V DC

Test Voltage:

18V AC/V DC

Rated Current:

0.35 Amperes (0.4 Amperes Maximum)

Duty:

Continuous

Solenoid Lead Wire Length:

6″

Important Feature:

Facilitate installation, Solenoid is constructed inside the lock case.

Important Notes:

1. Each electrified lock should have its own 24 volt transformer. Two or more locks may be operated in PARALLEL from a single transformer with the proper current rating. DO NOT connect locks in a series from a higher rated transformer.

2. We DO NOT recommend wiring electrified locks to a circuit containing electromagnetic devices as transient voltage can cause damage to the lock. Transient voltage must be suppressed at its source before connecting locks to the circuit.

3. A Varistor at 35 volts (peak-recurrent) may be used for transient voltage protection. 1-hole for latch bolt – Electric strike not available – must order 3rd party

Additional Baldwin Links
View the Manufacturer Warranty
Browse all Baldwin Products
Baldwin Mortise Lock Collection

Specifications