Grundfos SP 3A75 Multistage Submersible Pump with a Rated Flow of 17.6 US GPM, a Rated Head of 1610 Ft and Stainless Steel Construction

SP 3A75 Multistage Submersible Pump with a Rated Flow of 17.6 US GPM, a Rated Head of 1610 Ft and Stainless Steel Construction

SP 3A75 Multistage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibers. The pump is made entirely of Stainless steel DIN W.Nr. DIN W.Nr. 1.4301 and suitable for horizontal and vertical installation. The pump is fitted with a built-in non-return valve. The motor is a 3 phase motor of the canned type with a sand shield, liquid lubricated bearings and pressure equalizing diaphragm.

Technical:

Speed for pump data: 3450 rpm
Rated flow: 17.6 US gpm
Rated head: 1610 ft
Shaft seal for motor: CER/CARBON
Approvals on nameplate: CE,CSACUS

Material:

Pump: Stainless steel
Pump: DIN W.-Nr. 1.4301
Pump: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Motor: DIN W.-Nr. 1.4301

Installation:

Pump outlet: 1 1/4″ NPT
Motor diameter: 6 inch

Liquid:

Max liquid temperature at 0.15 m/sec: 86 °F

Electrical Data:

Motor type: MS6
Rated power – P2: 10 HP
Main frequency: 60 Hz
Rated voltage: 3 x 440-460 V
Start. method: direct-on-line
Service factor: 1.15
Rated current: 16.8-16.0 A
Cos phi – power factor: 0.86-0.85
Rated speed: 3450-3470 rpm
Enclosure class (IEC 34-5): 68
Additional Grundfos Links
Browse all Grundfos Products

Specifications