Grundfos 1100S3001A Multistage Submersible Pump with a Maximum Liquid Temperature of 104°F, a Rated Head of 68.9 Ft and Stainless Steel Construction

1100S3001A Multistage Submersible Pump with a Maximum Liquid Temperature of 104°F, a Rated Head of 68.9 Ft and Stainless Steel Construction

1100S3001A Multistage submersible pump for raw water supply, groundwater lowering and pressure boosting. The pump is suitable for pumping clean, thin, non-aggressive liquids without solid particles or fibers. The pump is made entirely of Stainless steel DIN W.Nr. DIN W.Nr. 1.4301 and suitable for horizontal and vertical installation. The pump is fitted with a built-in non-return valve. The motor is a 3 phase motor of the canned type with a sand shield, liquid lubricated bearings and pressure equalizing diaphragm.

Technical:

Rated flow: 1100 US gpm
Rated head: 68.9 ft
Approvals on nameplate: CSA
Curve tolerance: ISO9906

Material:

Pump: Stainless steel
Pump: DIN W.-Nr. 1.4301
Pump: AISI 304
Impeller: Stainless steel
Impeller: DIN W.-Nr. 1.4301
Impeller: AISI 304
Motor: Stainless steel
Motor: DIN W.-Nr. 1.4301
Motor: AISI 304

Installation:

Maximum ambient pressure: 870 psi
Pump outlet: 6″ NPT
Motor diameter: 6″ inch
Minimum borehole diameter: 10″ mm

Liquid:

Max liquid temperature at 0.15 m/sec: 104 °F

Electrical Data:

Motor type: MS6000
Rated power – P2: 29.5 HP
Main frequency: 60 Hz
Rated voltage: 3 x 230 V
Start. method: direct-on-line
Service factor: 1,15
Starting current: 474 A
Cos phi – power factor: 0,83
Rated speed: 3450 rpm
Motor efficiency at full load: 85,0 %
Additional Grundfos Links
Browse all Grundfos Products

Specifications