Speakman Eyesaver Single Post Laboratory Faucet

Our senses become rendered in the event of a chemical eye burn; we naturally react to crisis by instinctively scrambling to the nearest source of relief-the sink, safety showers, eyewash stations, etc.…However, with the introduction of “faucet-mounted” eyewash stations, victims can inadvertently flush scalding hot water into their eyes during a blur of confusion. The Speakman Eyesaver SEF-1850-8 Single Post Laboratory Eyewash Faucet with 8 In. Spout is a revolutionary product that combines a lab faucet with an independently operated eyewash. With a simple pull of the lever, soothing aerated water will instantly flush into the eyes of the victim. Two separate water supplies ensure that cold to tepid water will always be flushing out of the eyewash, regardless if hot water is being run from the faucet simultaneously. The Speakman SEF-1850-8 features an 8 inch spout, single-post mount design that will save valuable laboratory counter space and require no additional space to be installed. The emergency eye wash features a 2 GPM flow rate at 30 PSI while the faucet features a 1.5 GPM flow rate. Certified to ANSI/ISEA Z358.1, ASME A112.18.1/CSA B125.1, NSF 61 & NSF 372.

Speakman SEF-1850-8 Features:

Single post faucet with integrated eyewash
8 inch spout
Dual aerated spray heads with flip top caps
Eyewash is lift handle activated
Tepid water ready

Speakman SEF-1850-8 Specifications:

Length: 11″ (left to right)
Width: 7-5/8″ (front to back)
Height: 10-7/8″ (top to bottom)
Flow Rate (GPM): 2 gallons-per-minute
Additional Speakman Links
View the Manufacturer Warranty
Browse all Speakman Products
Speakman Eyesaver Collection

Specifications