1/40 HP 300 GPH 115 V Parts Washer Pump with 6′ Power Cord – No Plug
Designed for submerged use only, this pump is intended for use in UL-listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.
1/2″ MNPT conduit fitting
1/40 HP oil-filled motor
300 GPH @ 1′ maximum flow rate
Intermittent liquid temp. to 120F
Cast aluminum housing
Hooded intake
1/4″ MNPT discharge
Nylon volute & impeller
Viton(R) shaft seal
Nylon screen
Thermal overload protection
Additional Little Giant Links
View the Manufacturer Warranty
Browse all Little Giant Products
Specifications
| Height | 5.6 in. |
| Product Weight | 4.83 lbs. |
| Width | 3.5 in. |
| Depth | 5.5 in. |
| Discharge Diameter | 0.25 in. |
| Cord Length | 72 in. |
| Flow Rate by Feet of Head | 5 gal / 1 ft, 3.42 gal / 5 ft, 4.25 gal / 3 ft |
| Shut Off Height | 11.8 in. |
| Shut Off Pressure | 5.1 |
| Configuration | Specialty Pump |
| Material | Nylon |
| Submersible | Yes |
| Wattage | 100 |
| Voltage | 115 |
| Frequency | 60 Hertz |
| Amperage | 1.7 |
| Horsepower | 0.025 |
| Color | Steel |
| Color Tone | Steel Tones |
Reviews
There are no reviews yet.