1/150 HP 205 GPH Parts Washer Pump with 6′ Power Cord – No Plug
Submersible pump for use with stoddard solvent and deodorized kerosene submerged parts washer applications only. For pumping unheated metal parts cleaning solvent that is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.
1/2″ MNPT Master Builders Conduit Fitting
1/150 HP Oil filled motor
205 GPH Maximum flow rate @ 1′
Intermittent Liquid Temp. to 120F
Cast aluminum housing
1/4″ MNPT Discharge
Nylon volute
Nylon Impeller
Viton(R) double lip Shaft Seal
Polyethylene Screen
Thermal overload protection
Additional Little Giant Links
View the Manufacturer Warranty
Browse all Little Giant Products
Specifications
| Depth | 4.12 in. |
| Height | 4.25 in. |
| Width | 4.6 in. |
| Product Weight | 3.5 lbs. |
| Discharge Diameter | 0.25 in. |
| Cord Length | 72 in. |
| Flow Rate by Feet of Head | 2.8 gal / 3 ft, 3.42 gal / 1 ft, 2 gal / 5 ft |
| Shut Off Height | 7.4 in. |
| Shut Off Pressure | 3.2 |
| Material | Nylon |
| Configuration | Specialty Pump |
| Submersible | Yes |
| Automatic | No |
| Shutoff Head in Feet | 7.4 |
| Certifications | CSA |
| Voltage | 115 |
| Wattage | 70 |
| Frequency | 60 Hertz |
| Amperage | 1.1 |
| Horsepower | 0.006 |
Reviews
There are no reviews yet.