The Little Giant 10EN Series pumps feature 1/2 HP permanent split capacitor (PSC) motors providing lower current draw, energy efficiency, improved performance and cooler running for durability. In addition to a stainless intake plate, the 10EN also features a cast iron cover on the manual and RF (remote float switch) versions.
Product Features:
1/2 Horse Power with overload protection
New cooler running motor which extends the life of the pump
Designed for continuous duty
Covered by 12 month limited warranty
Handles 1/2″ solids
Cover made from: Cast iron
Housing made from: Cast iron
Impeller Type: Vortex
Impeller made from: Nylon
Switch Type: Snap action
Single phase operation
10′ Cord included
Product Specifications:
1/2 Horse Power
Voltage: 230V
4 Amp maximum operation
1-1/2″ Discharge diameter
Length: 10-3/5″
Width: 8-2/5″
Height: 10-1/5″
Flow rates (GPH: gallons-per-hour):
At 5 feet of head: 67
At 10 feet of head: 61
At 15 feet of head: 50
Shut Off (maximum head height): 30′
Additional Little Giant Links
View the Manufacturer Warranty
Browse all Little Giant Products
Little Giant 10EN Collection
Specifications
| Height | 10.18 in. |
| Width | 8.39 in. |
| Length | 10.6 in. |
| Water Connection | 1-1/2" |
| Cord Length | 120 in. |
| Discharge Diameter | 1.5 in. |
| Maximum Head Height | 30 in. |
| Minimum Head Height | 5 in. |
| Water Pressure (Max) | 13 PSI |
| Material | Cast Iron |
| Switch Type | Snap Action |
| Water Connection Type | NPT |
| Impeller Material | Nylon |
| Material Casing | Iron, Plastic |
| Material Housing | Iron |
| Approved for Commercial Use | Yes |
| Voltage | 230 |
| Amperage | 4 |
| Horsepower | .5 |
| Electrical Phases | 1 |
| Maximum Fluid Temperature | 140 °F |
Reviews
There are no reviews yet.